This week’s good guns: Powered by Gunsinternational.com …

F.lli. Rizzini R1 20 gauge SxS Shotgun
F.lli. Rizzini R1 20 gauge SxS Shotgun

F.lli. Rizzini R1 20 gauge: Sidelock double. Serial # 1308.  2 3/4″ chambers.  26″ chopper lump  bbls,  IC/Mod.  hand matted rib,  Stunning deep ” sculptured ” engraving by Sosta Gianfranco (deceased).   Straight hand stock with highly figured turkish walnut, dropper points, and splinter forend. Checkering is perfect 32 LPI.     Stock dimensions are 14 1/8″  LOP to center of checkered butt from a single trigger.   1 1/4 ” – 2 1/4 ” drop at heel without cast.  6 1/4 lbs.  This beautiful R1 Rizzini was made for Ambercrombie and Fitch in 1974  ( letter from Rizzini )  both names lettered in gold on barrels.  Gun remains in  “as new”  condition.  The overall fit and finish  and handling qualities of this Rizzini indicates the degree of hand work that was performed on their “best” guns during this period.  A fantastic bird gun. Leather VC case with makers label. Price: $31,500

John Rigby & Co. .470 Nitro Express Double Rifle in completely original condition with EXCELLENT bores:
John Rigby & Co. .470 Nitro Express Double Rifle in completely original condition with EXCELLENT bores:

John Rigby & Co. .470 Nitro Express Double Rifle in completely original condition with EXCELLENT bores:
Here we have something special:  A totally original, untouched John Rigby in .470 Nitro Express. What makes this one unique is CHARACTER:  This thing has been CARRIED…  The black on the floor plate being worn away to silver, and the same for the barrel black around the quarter rib –  just where your hand would carry for many long hikes.   Look at the checkering – none missing, but many worn down flat from being carried…  This thing has LOTS AND LOTS OF MILES on it…
Yet look again at the underlying condition:   The bores are excellent – no pitting, no staining, no erosion whatsoever.   Barrels ring true.   Most of the screw heads being aligned and their slots clean and unbuggered…   What this tells me is that someone carried this for years, yet they took great care of it each and every night.   Try and find another with half as much “personality”!   Harder yet, try holding this rifle and NOT ask yourself “If only you could talk…”   I don’t think this can be done!!!

John Rigby & Co. .470 Nitro Express Double Rifle in completely original condition with EXCELLENT bores:
John Rigby & Co. .470 Nitro Express Double Rifle in completely original condition with EXCELLENT bores:

The specifics:  Serial number 17964, circa 1921-22.   Boxlock Ejector action with extension.   Disk set strikers.  Class C engraving.  Harvey lever forend as seen on many fine Henry and Rigby rifles.   26” barrels.  The barrel rib is marked “John Rigby & Co. 43.Sackville St. London.” The top of the left barrel is marked “Special . 470 Bore . Big Game Rifle” and the top of the right barrel is marked “For Special Cordite Cartridges & Bullet 500 Grs.” Excellent bores. 100 yard standing site with 200- and 300-yard folding leaves.  Sling swivels (missing forward loop). Stock is 14 3/8” LOP over 1/8” black spacer.  No cheek piece and minimal cast so would work great for a left hand shooter (I shoot left handed and this rifle shoulders very nicely for me). Silver escutcheon engraved “J. McK”.   Cased in canvas case with brass hardware, leather trim and leather straps. Outer lid of case is marked “H. G. INGLE. / KOLHAPUR, / INDIA.”. The canvas is stained and worn through in several spots. The leather strap on the right side has torn but the piece is retained. Interior of case includes Rigby Sackville Street trade label, a second Rigby label to caution against leaving the action cocked, and many original accessories including Rigby tool for removal of striker discs, turnscrew, leather muzzle cover, snap caps, striker pot with strikers, and the foresight hood. What this does need is a new recoil pad as the current pad is dried and hardened.  The front swivel is missing the loop for the sling (presumably to allow usage of leather muzzle cover by sliding leather thong strap through the front swivel post).  If you wanted, you could have the checkering refreshed and barrels reblacked but if you ask me, that’s like repainting a vintage Corvette that’s been discovered with its original paint…   I’d vote to keep it like it is – and be the envy of every PH in camp the next time you are in Africa! Price: $26,500

PIOTTI BSEE SXS 12 GAUGE: #98XX 28″ 007 AND 014 2 3/4 DOUBLE TRIGGER EJECTORS SPLINTER FOREARM ENGLISH GRIP CHECKERED BUTT UPGRADE WOOD TEST FIRED ONLY 6LBS 10 OZ X 2 1/8″ X 1 7/16″ X 14 3/4″. Price: $18,500

PIOTTI BSEE SXS 12 GAUGE
PIOTTI BSEE SXS 12 GAUGE
Parker DHE Grade 3 Side by Side Shotgun 12 Gauge Two Barrel Set Pistol Grip Stock Splinter Forearm
Parker DHE Grade 3 Side by Side Shotgun 12 Gauge Two Barrel Set Pistol Grip Stock Splinter Forearm

Parker DHE Grade 3 Side by Side Shotgun 12 Gauge Two Barrel Set Pistol Grip Stock Splinter Forearm: #146041. This Parker has one set of 26” barrels and one set of 32” barrels. Both sets have 2 3/4” chambers and single beads. The 26” set has what measures .004 right and .004 left constrictions on the chokes. The bore diameters measure .7295 right and .7295 left. These barrels retain 90% original bluing with some small spots of surface rust and have a single ivory bead. The center rib is marked PARKER BROS. MAKERS. MERIDEN. CONN. TITANIC STEEL. The bores are clean and shiny. The 32” set has what measures .036 right and .036 left constrictions on the chokes. The bore diameters measure .7285 right and .728 left. These barrels retain 90% original bluing with some minor surface rust near the muzzle and have a single silver bead. The center rib is marked PARKER BROS. MAKERS. MERIDEN. CONN. TITANIC STEEL. The bores are clean and shiny. There is only one forearm. The 2 frame retains 10% original color. The trigger guard retains no bluing and has some surface rust in spots. It has double triggers and ejectors. The pistol grip stock and forearm are original and are in very good condition. The length of pull is 14 1/4” to the front trigger over a skeleton buttplate that has no finish and surface rust on it. Drop at comb: 1 3/4″, Drop at heel: 2 3/4″, weight: 7.9 lbs with the 32” barrels. Price: $10,000

LEFEVER ARMS Co C-GRADE 10 GAUGE SXS SHOTGUN: 30″ BARRELS WITH NEAR PERFECT DAMASCUS DOUBLE TRIGGER EXTRACTORS SPLINTER FOREARM PISTOL GRIP EXCELLENT ORIGINAL CONDITION WITH CASE COLORS 8LBS 1 OZ X 3″ X 2″ X 14 1/4″. Price: $7,500

LEFEVER ARMS Co C-GRADE 10 GAUGE SXS SHOTGUN
LEFEVER ARMS Co C-GRADE 10 GAUGE SXS SHOTGUN

This week’s good guns: Powered by Gunsinternational.com …

Flli. Piotti --- Model BSEE Boxlock Ejector --- 12 Gauge, 2 3/4" Chambers
Flli. Piotti — Model BSEE Boxlock Ejector — 12 Gauge, 2 3/4″ Chambers

Flli. Piotti — Model BSEE Boxlock Ejector — 12 Gauge, 2 3/4″ Chambers: 28″ SxS chopper-lump barrels with smooth concave rib choked improved cylinder & modified. 14 1/4″pull from front trigger to checkered wood butt. 1 1/2″ – 2 3/8″ drop. 1/4″ cast-off. Dark, oil-finished, highly figured Turkish walnut with Anson-pushbutton-release splinter forend, flat sidepanels, diamond-section straight English grip, and fine classic point-pattern checkering. Scalloped, casehardened receiver with manual top tang safety, SAFE inlaid in gold, and beaded-edge triggerguard, fine English rose & scroll engraved and with maker’s name inlaid in gold on both sides of the receiver, signed Granetti. Weight: 6lbs, 8oz. Built 2000. Retaining 99%+blue and 99% casehardening colors. Tight, with mirror-bright bores and ejectors in perfect time.  Price: $12,950.

HOLLAND & HOLLAND 500 3" BPE- UNDERLEVER REBOUNDING HAMMER- EXC BORES- 28" STEEL Bbls.- EXC. WOOD- ORIG. BLACK & OIL FINISH- ACCURATE
HOLLAND & HOLLAND 500 3″ BPE- UNDERLEVER REBOUNDING HAMMER- EXC BORES- 28″ STEEL Bbls.- EXC. WOOD- ORIG. BLACK & OIL FINISH- ACCURATE

HOLLAND & HOLLAND 500 3″ BPE- UNDERLEVER REBOUNDING HAMMER- EXC BORES- 28″ STEEL Bbls.- EXC. WOOD- ORIG. BLACK & OIL FINISH- ACCURATE#5891, Holland & Holland, 98 New Bond Street, London; Henry Jones Double Screw-Grip Underlever Rebounding Hammer Double Rifle Made in 1880 in a 500 3″ Black Powder Express with 28″ Steel Barrels with a full length rib with 1 standing & 2 folding rear sights, Percussion style fences, Wedge forend attachment, The frame engraved “Charge 4 1/4 Drams Case 3 Inches”, 14 5/8″ L.O.P. over a checkered horn buttplate, 9 lbs. 2 oz., Horn grip cap, Sling eyes, 85% coverage of period scroll engraving, Both the forend and buttstock are very solid in every detail and every respect, Excellent wood with great color and contrast, The gun remains with original finish and the barrels retain their original blacking at 60%, Original oil finish at 80%, Original checkering at 90%, The screw heads remain excellent, The striker holes have no primer burn, Both bores are very close to excellent plus with solid grooves & lands and without any pits and have almost no surface blemishes. It is cased in a vintage brass cornered trunk that also remains in very nice shape. This is a very stout classic BPE double that has a lot of life to go and completely ready for the 21st century. The records loading and shooting go with the gun based on several loads using nitro for black that shot 2 1/2″ groups at 60 yards and dead on to point of aim. About 50 loaded rounds go with the gun. This is another first rate quality, style, grace, workmanship, handling and H&H romantic from a great period at the pinnacle of sporting guns in the last years of the 19th century. Price: $12,900

ITHACA, FLUES, GRADE 5, 12 GAUGE.  TWO SETS OF BARRELS
ITHACA, FLUES, GRADE 5, 12 GAUGE.  TWO SETS OF BARRELS

ITHACA, FLUES, GRADE 5, 12 GAUGE.  TWO SETS OF BARRELS: 30″ FULL & FULL (MARKED 4 & 4), VERY GOOD BLUE, MIRROR BORES, TWIN IVORY SIGHTS, AUTOMATIC EJECTORS – 26″ CYLINDER AND MODIFIED (MARKED 0 & 2), VERY GOOD BLUE, MIRROR BORES, TWIN IVORY SIGHTS, AUTOMATIC EJECTORS.  BOTH HAVE SPLINTER FOREARMS.  GORGEOUS ENGRAVING, DEEP RELIEF CUT SCROLL AND FLOWERS, INTRICATE BORDERS.  RIGHT SIDE HAS A WHITE GOLD QUAIL INLAY, LEFT SIDE A WHITE GOLD STANDING PHEASANT, EAGLE WITH WINGS SPREAD ON FLOORPLATE.  ALL SCREW HEADS NICELY ENGRAVED.  PISTOL GRIP STOCK, HIGHLY FIGURED WALNUT WITH FLEUR DI LIS PATTERN, EXTREMELY FINE CHECKERING, GOLD SHIELD INLAY, SILVERS SOLID PAD.  AN OUTSTANDING GUN ENGRAVED BY BILL MCGRAW, ITHACA’S TOP ENGRAVER.  BUILT IN 1922, ALL MATCHING SERIAL NUMBERS, ALL ORIGINAL FINISH.  A RARE SET IN VERY PLEASING ORIGINAL CONDITION.  DIMENSIONS:  1 1/2″ X 2 1/2″ X 14″, WEIGHT WITH 26″ BARRELS 7 POUNDS 4 OUNCES, WITH 30″ BARRELS 7 POUNDS 10 OUNCES.  BOTH SETS RING, GUN IS TIGHT ON FACE WITH EITHER SET.  PRICE: $6500

20GA FERLACH AUSTRIA VINZ URBAS SxS SHOTGUN, GAME ENGRAVED
20GA FERLACH AUSTRIA VINZ URBAS SxS SHOTGUN, GAME ENGRAVED

20GA FERLACH AUSTRIA VINZ URBAS SxS SHOTGUN, GAME ENGRAVEDSeldom found 20 Austrian double gun. Photos tell the story. Handels as good as it looks. Diamond grip, Game engraved, Horn drop points and butt plate. Price: $3495
Bore: 20 GA
Chambers: 65MM
Condition: EXCELLENT
Metal Condition: EXCELLENT
Wood Condition: EXCELLENT
Bore Condition: EXCELLENT
Triggers: 2
Stock Comb: 1 5/16
Stock Heel: 2 1/4
LOP: 14 7/8IN
Weight: 5.8LBS
Manufacture Date: 1946
Choke Left: FULL
Choke Right: FULL
Minimum Wall Thickness Left: .023 BORE .622
Minimum Wall Thickness Right: .027 BORE .622

BERETTA – RARE – Model 427 – 12ga – 28″ SK / IC – Hand Engraved Side Plates1981 – Beretta Model 427 – 12ga, 28″, SK / IC (.007 / .011), Raised Solid Rib, Ejectors, Double Triggers, Pistol Grip, Splinter Forearm,  LOP 14-3/4″ Over a Leather Covered Pad, Drop 1-3/8″ to 2-3/8″, Weight 6 lbs. 14 oz. LOP will go 14-3/8″ with a Standard 1 inch pad. RARE! The 427 was never imported to the U.S. It is the predecessor to the Model 627EL. Previous owner opened the chokes and used the gun for SxS Sporting Clays. Price: $2,950

BERETTA - RARE - Model 427 - 12ga - 28" SK / IC - Hand Engraved Side Plates
BERETTA – RARE – Model 427 – 12ga – 28″ SK / IC – Hand Engraved Side Plates
%d bloggers like this: